Cisco 6500 “Environment Checksum in NVRAM Failed”

Had an issue where an older Cisco 6500 switch was rebooted, and the MSFC would not start correctly and gave the following errors: “environment checksum in nvram failed” and “rommon nvram area is corrupted”.

When trying to log into the the module from CatOS (session 15), the console stated that “module 15 is not installed”.  Tried to to manually boot the MSFC from ROMMON, using this helpful guide: http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6000-series-switches/19284-124.html but kept receiving the “nvram failed” error.  I was convinced it was potentially a hardware issue, but we physically removed the MSFC card, plugged it back in, and the nvram message disappeared and the MSFC module booted!  Good reminder that sometimes the simplest things can resolve a complex issue.

**Note: If you are running a SUP720, there is a field notice for corrupted NVRAM: http://www.cisco.com/c/en/us/support/docs/field-notices/200/fn27595.html

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s